Tesla Model 3/Y Highland Carbon Fiber Side Mirror Caps (OEM Style)
Couldn't load pickup availability
Dry Carbon Fiber Side Mirror Covers for Tesla Model 3 / Model Y
Upgrade the exterior appearance of your Tesla with genuine dry carbon-fiber mirror caps designed to fit over the compatible factory side-mirror shells. The full-coverage overlay design adds a clean performance-inspired finish while helping protect the original painted mirror surface from everyday cosmetic wear.
🏁 Dry Carbon Fiber
Made from dry carbon fiber rather than printed ABS or vinyl wrap, giving the mirror caps a genuine woven composite appearance.
🪞 Full Mirror-Cap Coverage
The overlay covers the visible upper surface of the compatible factory mirror cap for a more complete carbon-fiber appearance.
🛡 Helps Protect the Original Shell
Adds an outer layer over the factory painted mirror shell to help reduce direct exposure to light scratches, rubbing and everyday cosmetic wear.
🔧 Adhesive Overlay Installation
Installs directly over the compatible original mirror caps using the self-adhesive backing, without replacing the complete mirror housing.
OEM-Style Shape, Carbon-Fiber Overlay
Fits Over the Original Mirror Cap
This product is an exterior overlay rather than a replacement mirror shell. The original painted cap remains underneath.
No Mirror Glass Removal
Installation focuses on cleaning, alignment and bonding the cover over the original shell rather than disassembling the complete mirror assembly.
Fuller Coverage Than a Small Trim Piece
The matched left-and-right caps cover the visible upper mirror-cap area for a more complete carbon-fiber exterior look.
Available Finishes
| Current Option | Appearance |
|---|---|
| Glossy Carbon Fiber | Reflective clear finish with stronger highlights and a more pronounced carbon weave |
| Matte Carbon Fiber | Lower-reflection finish with a more understated carbon-fiber appearance |
Fitment
| Vehicle | Current Supplier Range |
|---|---|
| Tesla Model 3 Highland | 2024+ |
| Tesla Model Y | 2020–2025.03 |
| Tesla Model 3 | 2017–2023.10 |
⚠️ Model Y Juniper Is Not Confirmed
The current live Model Y option ends at 2025.03 and does not explicitly list Model Y Juniper. Do not assume Juniper compatibility based only on the Model Y name. For refreshed or changeover vehicles, compare the original mirror-cap shape before ordering.
⚠️ Mirror Shape Determines Fit
Different Tesla generations use different mirror-shell geometry. Always select the correct vehicle group and dry-fit both covers before removing the adhesive liner. If the cap rocks, requires force or leaves an uneven perimeter gap, stop installation and recheck compatibility.
Material & Construction
| Attribute | Details |
|---|---|
| Material | Dry Carbon Fiber |
| Product Style | Full-Coverage Mirror Cap Overlay |
| Installation | Self-Adhesive Overlay |
| Finish Options | Glossy / Matte |
Dry Carbon Fiber — Not Carbon-Look Plastic
The current supplier page specifically identifies these covers as dry carbon fiber. They should not be described as ABS with a carbon-fiber print or as a vinyl wrap.
Specifications
| Attribute | Details |
|---|---|
| Product Type | Side Mirror Cover / Overlay Cap |
| Material | Dry Carbon Fiber |
| Coverage | Visible Upper Factory Mirror-Cap Surface |
| Quantity | Left + Right Pair |
| Finish Options | Glossy Carbon Fiber / Matte Carbon Fiber |
| Installation | Self-Adhesive Overlay |
Package Includes
1 × Left Dry Carbon Fiber Side Mirror Cover
1 × Right Dry Carbon Fiber Side Mirror Cover
Installation Guide
1. Clean the Factory Mirror Caps
Remove dust, wax, oil, detailing products and moisture from the original mirror-cap surfaces.
2. Identify Left & Right Covers
Match each carbon-fiber cap to the correct mirror before exposing the adhesive.
3. Dry-Fit Both Sides
Place each cover over the original mirror cap with the adhesive liner still attached.
Check all perimeter edges and confirm the cover sits naturally.
4. Remove the Adhesive Liner
Once fitment is confirmed, carefully remove the protective liner from the self-adhesive backing.
5. Align Before Bonding
Position the cover accurately before making full contact with the original mirror shell.
6. Apply Even Pressure
Press evenly along the full perimeter to help the adhesive bond consistently.
7. Allow the Adhesive to Set
Avoid washing the vehicle or directly stressing the mirror-cap edges immediately after installation.
⚠️ Dry-Fit Before Exposing the Adhesive
Do not remove the adhesive liner until both mirror covers have been test-fitted. If the cover requires force, rocks on the factory shell or leaves an uneven gap, the vehicle mold may be incorrect. Stronger pressure or additional adhesive will not correct a mismatched mirror shape.
⚠️ Removal May Leave Adhesive Residue
The factory mirror cap remains underneath this overlay, but removal effort and adhesive residue can vary depending on installation time, weather exposure, temperature and surface condition. Residue-free removal on every vehicle cannot be guaranteed.
Exterior Care
Use a soft microfiber cloth and mild vehicle-safe cleaner for routine cleaning. Avoid abrasive pads or aggressive solvents that could mark the outer finish.
Inspect the bonded perimeter periodically to make sure both mirror covers remain securely attached.
Avoid directing close-range high-pressure water directly at the bonded edges.
Quick Answers
Are these real carbon fiber?
Yes. The current supplier page specifically identifies the mirror covers as dry carbon fiber.
Do these replace the original factory mirror shells?
No. They are overlay caps fitted over the compatible original mirror shells. The factory caps remain in place underneath.
Does the package include both sides?
Yes. The current supplier page shows a matched left-and-right pair.
What finishes are available?
The current selector offers Glossy Carbon Fiber and Matte Carbon Fiber.
Does it fit Model 3 Highland?
Yes. The current selector includes Model 3 Highland 2024+.
Does it fit older Model 3 vehicles?
Yes. A separate option is currently listed for Model 3 2017–2023.10.
Does it fit Model Y?
Yes. The current Model Y option is listed for 2020–2025.03.
Does it fit Model Y Juniper?
Model Y Juniper is not explicitly listed in the current selector. The current Model Y range ends at 2025.03, so Juniper compatibility should not be assumed.
Do I need to remove the mirror glass?
No. This is an adhesive overlay installation over the original exterior mirror cap, not a complete mirror-shell replacement.
Can the covers be removed later?
Yes, but removal effort and possible adhesive residue depend on bonding time, temperature, weather exposure and the condition of the original mirror-cap surface.
Customization Unleashed
All products on Evmize.com have been road and fitment tested. Sourcing from the most popular manufactures & selecting only the best products to bring to market.
