Real Dry Carbon Fiber Upper Door Trim for Model 3 Highland / Model Y Juniper
Couldn't load pickup availability
Real Dry Carbon Fiber Upper Door Trim for Model 3 Highland & Model Y Juniper
Replace the plain upper-door appearance with genuine dry carbon fiber overlays engineered around the refreshed Tesla interior. Lightweight molded carbon construction adds a motorsport-inspired finish while helping protect the original trim from scratches, scuffs and everyday wear.
Genuine Dry Carbon Fiber
Made from real dry carbon fiber rather than ABS with a printed carbon pattern, delivering authentic weave depth, rigid lightweight construction and a premium appearance.
Protects the Original Door Trim
Covers the exposed upper-door trim to help shield the original surface from fingerprints, scratches, scuffs and normal daily contact.
Peel-and-Stick Overlay
Installs directly over the existing upper-door trim using the supplied adhesive backing, with no drilling or replacement of the complete factory door panel.
Why This Dry Carbon Door Trim Stands Out
Genuine carbon construction creates real fiber depth and texture that cannot be reproduced by printed hydro-dipped ABS trim.
Each panel follows the contours of the original Tesla upper-door trim instead of using flat universal carbon sheets.
Current product imagery shows four dedicated overlays, including longer front-door sections and matching shorter rear-door sections.
Manufacturer documentation identifies a UV-coated finish designed to help resist fading and maintain the carbon appearance over time.
Choose Matte, Glossy or Forged depending on whether you prefer a restrained OEM-plus finish, a reflective carbon weave or a more aggressive forged appearance.
Real Carbon — Not Carbon-Look ABS
This product uses real dry carbon fiber. It should not be confused with lower-cost ABS trim pieces that only use a printed, wrapped or hydro-dipped carbon-fiber appearance.
Choose Your Carbon Finish
Peel-and-Stick Installation Over the Factory Trim
Verify Model 3 Highland or Model Y Juniper before installation. Earlier Model 3 / Model Y door designs use different upper trim geometry.
Remove dust, fingerprints, wax and interior dressing from the original upper-door trim, then allow the surface to dry completely.
Place each carbon piece over its matching door trim without exposing the adhesive to verify orientation, edge alignment and clearance.
Remove the protective liner gradually rather than exposing all adhesive at once, helping maintain precise alignment during placement.
Align the molded edges with the original trim and apply firm, even pressure across the full carbon panel.
Inspect the perimeter and press again around curved sections to ensure the overlay sits securely and evenly.
These are molded overlays that install over the original upper trim. The complete factory door card does not need to be removed or replaced.
The latest manufacturer selector now groups Model YL 2026+ with Model Y Juniper, but TESKAY currently lists Model Y Juniper only. Confirm Model YL door-panel geometry before ordering until a dedicated TESKAY option is added.
Specifications
| Attribute | Details |
|---|---|
| Product | Real Dry Carbon Fiber Upper Door Trim Panel Overlay |
| Current Default Source Selection | Model 3 Highland 2024+ / Matte |
| TESKAY Model 3 Fitment | Model 3 Highland 2024–Present |
| TESKAY Model Y Fitment | Model Y Juniper 2025–Present |
| Manufacturer Model YL Listing | Model YL 2026+ Listed by Current Source; Not Yet in TESKAY Selector |
| Legacy Model 3 / Model Y | Not Listed for This Product |
| Material | Genuine Dry Carbon Fiber |
| Finish Options | Matte / Glossy / Forged |
| Installation Location | Upper Door Trim Panels |
| Set Configuration | 4 Molded Door Trim Overlays Shown in Current Product Imagery |
| Installation Type | Overlay / Peel-and-Stick |
| Adhesive | Pre-Applied Adhesive Backing |
| Verified 3M Branding | Not Published |
| Drilling | Not Required |
| Door Panel Replacement | Not Required |
| Tool Requirement | No Special Tools Required for Normal Overlay Installation |
| UV Surface Protection | Manufacturer-Listed UV-Coated Finish |
| Scratch / Wear Protection | Designed to Help Protect Original Door Trim from Daily Wear |
| Published Weight | Not Published |
| Published Dimensions | Not Published |
| Package | Vehicle-Specific Real Dry Carbon Fiber Upper Door Trim Overlay Set |
Quick Answers
Is this genuine carbon fiber? +
Yes. The current manufacturer specification identifies the product as genuine dry carbon fiber rather than carbon-patterned ABS.
Which Model 3 does it fit? +
TESKAY currently lists the product for Model 3 Highland 2024–Present.
Which Model Y does it fit? +
TESKAY currently lists the product for Model Y Juniper 2025–Present.
Does it fit Model YL? +
The latest manufacturer selector now lists Model YL 2026+, but TESKAY has not yet added Model YL to its own product selector. Confirm the exact upper-door trim design before ordering for Model YL.
Does it fit the older Model 3 or Model Y? +
No legacy Model 3 or Model Y option is currently listed for this specific product. Their upper-door trim shape is different from Highland and Juniper.
How many pieces are included? +
Current product imagery shows four molded overlays: two longer front-door sections and two shorter rear-door sections.
Is this a replacement door panel? +
No. These pieces are overlays that install over the existing factory upper-door trim.
What is the difference between Matte and Glossy? +
Matte has a lower-reflection appearance, while Glossy uses a more reflective clear finish that emphasizes the woven carbon pattern.
What is the Forged option? +
Forged is the current alternative carbon appearance using a fragmented, irregular pattern instead of the traditional woven visual used on the Matte and Glossy options.
Does installation require drilling? +
No. The current installation method is a peel-and-stick overlay and does not require drilling.
Is the adhesive definitely 3M? +
The current source confirms peel-and-stick adhesive backing but does not reliably identify 3M branding, so this page does not claim a specific adhesive manufacturer.
Will the overlays block the window switches or door controls? +
The pieces are molded specifically for the upper trim area and are designed to leave the primary door controls and functional openings accessible.
Does it protect the factory trim? +
Yes. In addition to changing the appearance, the carbon overlay provides another surface layer over the original trim to help protect against scratches, scuffs and daily wear.
Is the surface UV protected? +
The current manufacturer description identifies a UV-coated carbon surface designed to help resist fading from normal cabin sun exposure.
Are exact dimensions or weight published? +
No verified overall dimensions or set weight are currently published, so this description does not invent those values.
Customization Unleashed
All products on Evmize.com have been road and fitment tested. Sourcing from the most popular manufactures & selecting only the best products to bring to market.
