LED Rear Bumper Reflector Lights for Model Y Juniper / YL
Couldn't load pickup availability
LED Rear Bumper Reflector Lights for Model Y Juniper / Model YL
Restore a damaged lower rear bumper light with an OEM-spec LED assembly engineered to match the original mounting points, wiring interface, lighting behavior and factory appearance of the refreshed Model Y.
Vehicle-Matched LED Function
Designed to reproduce the lighting behavior of the original bumper lamp in that position, including the applicable turn-signal and safety-light functions for your vehicle configuration.
1:1 Factory Fit
Vehicle-specific housing geometry follows the original rear fascia mounting structure for clean bumper gaps and OEM-style positioning.
Plug-and-Play Connection
Connects through the factory-style electrical interface without cutting, splicing, or permanently modifying the original vehicle wiring.
Why This Rear Bumper Light Stands Out
Replace a cracked, broken or failed lower bumper lamp without redesigning the rear lighting system or adding a universal aftermarket light.
Replace only the damaged side or choose the Left & Right option when both assemblies need to be renewed together.
Fremont/Texas and Shanghai/Berlin versions are offered because regional Model Y vehicles use different rear-light wiring and lighting configurations.
Whether the original vehicle uses a standard or sequential turn-signal behavior, the correct version is designed to follow the vehicle's original configuration.
Integrated resistors and vehicle-compatible electronics are designed to communicate correctly with the factory lighting system and avoid unnecessary dashboard warnings.
Replacement Part — Not a Decorative Add-On
This assembly replaces the original Fascia Marker Lamp / Bumper Reflex Lamp in the lower rear bumper. It is designed to occupy the original lamp position and connect to the vehicle's existing lighting system rather than being mounted over the factory reflector.
OEM-Style Housing & Factory Interface
Region-Matched Plug-and-Play Installation
Fremont / Texas Giga Version
Intended for the corresponding North American-style vehicle electrical configuration. Applicable markets listed by the manufacturer include the USA, Canada, Mexico and South Korea.
Shanghai / Berlin Giga Version
Intended for the corresponding European / APAC electrical configuration, including Europe, China, UK, Australia, New Zealand and similar markets.
Access the original lower rear bumper lamp from the interior side of the rear fascia.
Release the original assembly by removing the three Torx T25 fasteners that secure the lamp to the rear fascia.
Unplug the original electrical connector without cutting or altering the vehicle's wiring harness.
Connect the replacement lamp, reinstall the original mounting screws, then test all applicable lighting functions before completing reassembly.
Fremont/Texas and Shanghai/Berlin vehicles can use different rear-light wiring and functions. Select the version that matches your vehicle's original production configuration rather than choosing only by your current country of residence.
Specifications
| Attribute | Details |
|---|---|
| Product | LED Rear Bumper Reflector Light Assembly |
| Primary Compatibility | Tesla Model Y Juniper 2025+ |
| Additional Listing | Model YL |
| Not Compatible | Legacy Model Y 2020–2024 Rear Bumper |
| Part Type | Fascia Marker Lamp / Bumper Reflex Lamp Replacement |
| Light Source | LED |
| Lighting Behavior | Vehicle-Matched Factory Configuration |
| Turn Signal | Standard or Sequential According to Original Vehicle Configuration |
| Production Versions | Fremont/Texas Giga / Shanghai/Berlin Giga |
| Position Options | Left / Right / Left & Right |
| Vehicle Electronics | CAN-Bus Compatible with Built-In Resistors |
| Electrical Connection | Factory Plug-and-Play Connector |
| Mounting | 3 × Torx T25 Fasteners at Rear Fascia |
| Wire Cutting | Not Required |
| Coding | Not Required |
Quick Answers
Is this an add-on light or a replacement for the original bumper lamp? +
It is a complete replacement assembly for the original lower rear Fascia Marker Lamp / Bumper Reflex Lamp. The original unit is removed before this replacement is installed.
Will it fit a 2020–2024 Model Y? +
No. The 2025+ Model Y Juniper uses a redesigned rear fascia, so this lamp does not fit the original 2020–2024 Model Y bumper.
Why do I need to choose Fremont/Texas or Shanghai/Berlin? +
Different production regions can use different rear-light wiring and lighting behavior. Select the version that matches your vehicle's original manufacturing configuration.
Does it use a sequential turn signal? +
The correct version is designed to follow your vehicle's original configuration. If the original lamp uses a sequential signal, the replacement follows that behavior; vehicles with a standard signal retain the corresponding standard behavior.
Can I replace only one side? +
Yes. Left and Right are available individually, and a Left & Right option is available when both sides need replacement.
Do I need to cut wires or program the vehicle? +
No. The replacement uses the existing factory connector and is designed for plug-and-play installation without wire cutting, splicing, or additional coding.
How is the light physically installed? +
The lamp is secured to the rear fascia with three Torx T25 screws accessible from the interior side of the bumper, then connected to the original factory electrical connector.
Customization Unleashed
All products on Evmize.com have been road and fitment tested. Sourcing from the most popular manufactures & selecting only the best products to bring to market.
